Custom Listing
WHITE OAK LED SHELVES
(2) 37X12” SATIN 3000k LEDs BOTTOM REAR $303.25 each
(2) METAL BRACKETS FOR 37” SHELVES $130 each
TOTAL: $866.50
DISCLAIMER (PLEASE READ BELOW):
All shelves in your order are handcrafted by Lyons Crafted and made to order from [WHITE OAK] for the faces and sides with cabinet grade plywood veneer on the tops and bottoms of the shelves. Due to the natural characteristics of real wood, including knots, grain patterns, color variation, and minor imperfections, Each shelf is one of a kind, no two pieces will be exactly alike. Natural movement of wood over time (expansion or contraction) is normal and not considered a defect. Shelves made from White Oak, Maple, or Walnut should not expect any knots.
All necessary mounting hardware and brackets for proper installation are included.
Shelves must be installed into wall studs or appropriate structural blocking on a flat and plumb wall.
Lyons Crafted is not responsible for improper installation, unsatisfactory wall conditions, or damage resulting from incorrect mounting.
All LED shelves include a [NON-DIMMABLE LED] driver designed to be hardwired directly to 110–120VAC power. Non-dimmable shelves must be wired to a non-dimmable switch.
If one driver is purchased for several shelves, each individual shelf will NOT include a pre-wired driver. In this case, all shelves will need to be daisy-chained together, first with low voltage wire, then connected to the driver before connecting to your power source. In this case, confirm the LED driver is of appropriate wattage to support all shelves’ LEDs in the group. Single color LEDs require 10W per meter.
Dimming or non-dimming wall switches are NOT included.
A licensed professional electrician is required for all wiring and electrical connections.
Lyons Crafted assumes no responsibility for electrical work performed by others or for damage caused by improper wiring or installation.
WHITE OAK LED SHELVES
(2) 37X12” SATIN 3000k LEDs BOTTOM REAR $303.25 each
(2) METAL BRACKETS FOR 37” SHELVES $130 each
TOTAL: $866.50
DISCLAIMER (PLEASE READ BELOW):
All shelves in your order are handcrafted by Lyons Crafted and made to order from [WHITE OAK] for the faces and sides with cabinet grade plywood veneer on the tops and bottoms of the shelves. Due to the natural characteristics of real wood, including knots, grain patterns, color variation, and minor imperfections, Each shelf is one of a kind, no two pieces will be exactly alike. Natural movement of wood over time (expansion or contraction) is normal and not considered a defect. Shelves made from White Oak, Maple, or Walnut should not expect any knots.
All necessary mounting hardware and brackets for proper installation are included.
Shelves must be installed into wall studs or appropriate structural blocking on a flat and plumb wall.
Lyons Crafted is not responsible for improper installation, unsatisfactory wall conditions, or damage resulting from incorrect mounting.
All LED shelves include a [NON-DIMMABLE LED] driver designed to be hardwired directly to 110–120VAC power. Non-dimmable shelves must be wired to a non-dimmable switch.
If one driver is purchased for several shelves, each individual shelf will NOT include a pre-wired driver. In this case, all shelves will need to be daisy-chained together, first with low voltage wire, then connected to the driver before connecting to your power source. In this case, confirm the LED driver is of appropriate wattage to support all shelves’ LEDs in the group. Single color LEDs require 10W per meter.
Dimming or non-dimming wall switches are NOT included.
A licensed professional electrician is required for all wiring and electrical connections.
Lyons Crafted assumes no responsibility for electrical work performed by others or for damage caused by improper wiring or installation.